Then screw on the screw cover with the wick again and let the fuel rise for about 2 minutes so that the wick absorbs enough up to the top edge. After unscrewing, pour the lamp oil or kerosene to below the top edge so that the fuel does not overflow.Open the oil canister cap by unscrewing its screw cap anti-clockwise. ![]() Pull up both rings to remove the canister from the lamp body. The ends of this wire are terminated with rings. This metal canister is soldered to the locking wire. Open the top lid and pull out the small oil container located at the bottom of the lamp with the wick protruding.In order to shine with the lamp, you must pour kerosene or lamp oil into it. This replica of a historic naval lantern is fully functional. ![]() Instructions on how to use this Retro sea ship lantern The upper metal cap can be open an closed and secured with a hook on chain.The upper metal cover with ventilation holes measures approx.Material thickness of the anchor handles approx.The lantern itself without handles is about 24.5cm high.This functional replica looks great as a decoration in offices or other interiors. In this lantern you can burn both kerosene and lamp oil. Inside is a small oil lamp with adjustable wick length = flame size. The front contains a lock with a hook cap on the chain. The top of the lantern is perforated to dissipate flue gas and heat. Thanks to the upper and lower bracket, the lantern can be attached to the rope and pulled out or lowered as needed. ![]() Retro sea ship lantern after an original from 1939
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |